If you alter patterns before saving, your changes will be discarded. To save the pattern manually, hold down the (SHIFT) + RUN / STOP buttons simultaneously for about a second. One of the OCTAVE / LOCATION LEDs (1-8) will start blinking rapidly, signaling the location where the pattern will be saved.
To confirm saving the pattern to this location, just press the (SHIFT) + RUN / STOP buttons again. Alternatively, you can use the (KB) button or the (STEP) button to choose a different pattern location. The blinking LED will indicate the selected location. Press the (SHIFT) + RUN / STOP buttons to save your pattern there, or simply press the RUN / STOP button to exit without saving.
NOTE: You may also press and hold (SHIFT) and tap one of the eight corresponding pattern location buttons.
To manually save the pattern to a location in another bank (1-8), first press and hold the (BANK) button while using the (KB) button or the (STEP) button to select a different bank. Release the (BANK) button, and you can now select a pattern location within that bank using the (KB) button or the (STEP) button. Press the (SHIFT) + RUN / STOP buttons to save your pattern to this location, or just press the RUN / STOP button to exit without saving.
NOTE: You can also hold (BANK) and press one of the eight corresponding bank location buttons.
CANCEL / SAVE
To finalize the saving process, press (SHIFT) + RUN / STOP.
If you wish to exit the saving process at any moment, just press RUN / STOP.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article