If you change patterns before saving your changes, the changes will be lost. To manually save the pattern press the (SHIFT) + RUN / STOP buttons simultaneously for about a second. One of the OCTAVE / LOCATION LEDs (1-8) will begin to blink rapidly indicating the location where the pattern will be saved.
To save the pattern to this location, simply press the (SHIFT) + RUN / STOP buttons again. Otherwise, use the (KB) button or the (STEP) button to select a different pattern location. indicate the specified location. Again, the blinking LED will indicate the specified location. Press the (SHIFT) + RUN / STOP buttons to save your pattern to this location, or simply press the RUN / STOP button to exit without saving.
NOTE: You can also hold (SHIFT) and press one of the eight corresponding pattern location buttons.
To manually save the pattern to a location in a different bank (1-8), rst press and hold the (BANK) button while using the (KB) button or the (STEP) button to select a different bank. Release the (BANK) button and you can now use the (KB) button or the (STEP) button to select a pattern location within that bank. Press the (SHIFT) + RUN / STOP buttons to save your pattern to this location, or simply press the RUN / STOP button to exit without saving.
NOTE: You can also hold (BANK) and press one of the eight corresponding bank location buttons.
CANCEL / SAVE
To complete the saving process press (SHIFT) + RUN / STOP.
To exit the saving process at any time, simply press RUN / STOP.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article