Our support team will be working with limited hours from December 24th to January 2nd. While we’re here to help, response times may be a little longer than usual.



How do I stereo-link my 500 Series Analog Delays?

Modified on Wed, 5 Jul, 2023 at 10:37 AM

The included Stereo Linking Kit allows you to link two units together via special stereo linking cable. With two Delays linked, one device becomes the master and the other the slave.

  • In a stereo-linked pair of Analog Delays, the master device controls the slave device’s: DELAY TIME, TIME RANGE (0.5x/1.0x), FEEDBACK, LFO RATE, LFO SHAPE, and LFO AMOUNT settings.

  • DRIVE, OUTPUT, and MIX controls are analog, independently controlled and not linked.

  • The TAP/CV Input works across the stereo link from the master to the slave only.

  • All MIDI messages received by the master will be echoed to the slave with the exception of MIDI system exclusive (SysEx) messages.

More information can be found on p.20 of the manual.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article