Our support team will be working with limited hours from December 24th to January 2nd. While we’re here to help, response times may be a little longer than usual.
To Sync your DFAM to a Mother-32, simply patch from the ASSIGN output jack on the Mother-32 Patchbay, into the ADV / CLOCK input on the DFAM.
IMPORTANT NOTE: You will need to ensure that the Mother32’s Assignable output is set to transmit clock. To learn more about Mother-32’s Assignable output, see pages 44, 49, and 50 in the Mother-32 User’s Manual.
Press RUN / STOP on your DFAM. This will ensure that it is ready to play when it begins receiving a Clock signal from the Mother-32.
Press RUN / STOP on the Mother-32. Both units should now be playing in sync.
TIP: Mother-32 can transmit different clock divisions depending on its internal settings. Experimenting with these clock divisions allows DFAM to play in sync with Mother-32, but at a division of the master tempo.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article